Brake systems from HRE        Home

 

 
Billet Ohmega4 Radial Mount
Caliper for up to 14" Discs:

This specially configured Omega 4 narrow body caliper features an increased bridge radius to allow proper pad alignment and bridge clearance for use with upp to 14.00" diameter rotors. The body design is designed with 16 mm pads to provide the narrowest possible profile for tight clearance applications. Radial mounting simplifies adaptation and provides two 90deg separated planes to adjust for accurate alignment over the disc. These calipers provides big stopping power over a broad range of custom, high performance, and off road vehicle applications.

The Omega 4 have extremely durable and efficient body design. It is the product of computer generated solid modeling and FEA stress analysis technology.  The main strength and resistance to deflection comes from the four high-strength steel bolts. A center bridge bolt provides even more overall strength and easy access to the pads without the need to remove the caliper from the mount.

Omega 4 calipers are assembled with one-piece stainless steel pistons and high temperature, square faced bore seals. Stainless pistons are used for their slow heat transfer properties and high resistance to corrosion. Slow heat transfer reduces the potential for heat related pedal fade and increases the service life of the fluid and seals. The high temperature square faced bore seals have the largest possible sealing area and provide controlled piston retraction on release. The differential bore six-piston configuration distributes the clamping load over the length of the pad to promote even wear in the highest temperature environments. This is especially beneficial to vehicles that often realize high temperatures during hard braking. The bore size and configuration from 4 to 6 pistons are custom configurable

In addition, each Omega 4 is equipped with Stainles steel spring bridge plates. Stainles steel plates eliminiate all bridge wear caused by pad gauging and extend the life of the caliper. The spring-loaded action of the stainless steel plates also eliminates pad rattle and dampens the harmonic vibrations that contribute to pad squeal.  A full range of PolyMatrix pad compounds is available from Wilwood to match the brake response and heat range of any competition or sports driving application.

Home