261 Character(s) not supported by Table Language.

Problem: Getting warning "Character(s) not supported by Table Language."

1 When editing a table.
Versions: All

Solution:
The default table language for Paradox table is called Paradox 'ascii', which is based on DOS code page 437. To save extended characters, select the Paradox 'intl' driver in the Table Language dialog box (accessed by selecting Table Language from the Table Properties drop-down list of the Restructure dialog box). Also make sure that Table | Strict Translation is checked.


2 When I try to View - Document Source.
Versions: All
Date: 22 March 2006

Solution by: Anne Wainwright
The solution was to delete all the printers. Trust me when I say that doing this immediately after validating the problem resulted in an immediate clearing of the problem.

To index