1:48 scale party decorations

Here's a couple of decorating hints for those who want to arrange a small-scale birthday party.

Balloons

Mix polymer clay for the balloon colors you want. I used a mix of transluscent and colored clay. (If you use a fairly transluscent clay like Cernit, you might want to use the colored clay as it is - if you want to lighten the color, try mixing with a little white rather than transluscent.)

Roll a 5 mm or 3/16" (approx.) diameter ball in the palm of your hand, and turn it into a pear shape by rolling one side of the ball with the edge of your finger. Cluster the balloons as desired, adding some of other shapes too if you'd like (oblong balloons will need slightly more clay). Here and there, insert a tiny ball in the clusters, to represent balloons that have shrunk because they weren't tied off properly... If some balloons should have wires, let them cool to firm up (perhaps in the fridge) to prevent distortion when you insert the wires.

Harden as per manufacturer's instructions. Add a gloss coat if you'd like.

Serpentine streamers

You need sewing thread, FrayCheck, and a sewing pin. Take some FrayCheck on your index fingertip and pull a few inches of thread between your thumb and index fingertips. Quickly spiral the thread around the pin (the FrayCheck will dry very quickly). The pin should show between the loops - otherwise the thread will stick together. When completely dry, carefully push the thread coil to slide it off.

© Copyright Anna-Carin Betzén 2002, 2005. My instructions for making party decorations were first published in the Little Enough News group on Yahoo, in August 2002